Basalt Fiber Rebar (FRP) supplied by Global Optimals is a rod‑type reinforcement made from high‑strength basalt fiber bound with a polymer matrix, offering complete corrosion resistance. Basalt fiber is produced by melting natural basalt rock at temperatures above 1500 °C and then extruding the molten material into continuous filaments; this process yields fibers with a high tensile modulus, excellent thermal stability and inherent chemical inertness. The polymer matrix, typically an epoxy or polyester resin, encapsulates the fibers, providing protection against aggressive environments and ensuring strong bond performance with concrete. Key technical specifications include tensile strength ≥ 1000 MPa, modulus of elasticity 50–60 GPa, and density 1.9–2.1 g/cm³, delivering strength comparable to steel while reducing weight by a factor of four. Available diameters range from 4 mm to 36 mm, enabling designers to select the appropriate size for everything from thin slab reinforcement to large‑span bridge girders. The material retains its mechanical properties up to about + 400 °C and resists alkaline, acidic and saline media, making it ideal for concrete structures, bridges, tunnels, and marine installations. In addition, basalt rebar is increasingly used in chemical‑process plant tanks, underground support systems, industrial floor slabs, and prefabricated lightweight panels where durability and reduced dead load are critical. Its relatively low modulus of elasticity compared to steel helps mitigate cracking caused by temperature fluctuations, thereby extending service life. For handling, store the rebar in a dry, well‑ventilated area protected from direct sunlight and moisture, and avoid prolonged exposure to strong solvents that could degrade the polymer binder. Delivery time is guaranteed within 7 days to Tashkent and 10‑14 days to other Central Asian locations. A complete documentation package (TDS, SDS, COA) ensures compliance with international and regional standards.
| Прочность | ≥1000 МПа |
| Модуль упругости | 50–60 ГПа |
| Плотность | 1.9–2.1 г/см³ |
| Диаметр | 4–36 мм |
Coils 50–100 m / Bars 6–12 m
Store the basalt rebar in a dry, well‑ventilated area at ambient temperatures (approximately +5 °C to +30 °C) and protect it from direct sunlight and moisture. When packaging remains intact, the product typically retains its performance for 3–5 years. During handling and unloading, avoid impacts, bending or excessive compression to prevent damage to the basalt fibers and polymer matrix. Packaging—usually polyethylene bags or boxes—must stay undamaged; any tears or signs of moisture require isolation and inspection before further use.
